Metering pump, ceramic pump, corrosion resistant pump

产品展示
current location:Home > Product > FMI Metering Pumps > OEM Pumps

    RH Motorless Miniature OEM Pump

    RH Miniature Motorless Features:Ceramic and PVDF standard wetted materials - also available in Tefzel0 to100 microliters per strokePrecision stroke to stroke = 0.5% or betterPressures from -10 to 100

    1. Details
    2. Technical Information
    3. Technology applicatiTechnology Applicationon
    4. Literature
    5. Test Reports and Certifications

    RH Miniature Motorless Features:

    • Ceramic and PVDF standard wetted materials - also available in Tefzel

    • 0 to100 microliters per stroke

    • Precision stroke to stroke = 0.5% or better

    • Pressures from -10 to 100 psig

    • Needs only 17 inch ounces of torque

    • Requires only 2 1/4" panel space

    • Standard 1/4" O.D. tubing or 1/4-28 female

    • Adjustable while running or at rest

    • 0 to 100% stroke length adjustment for maximum flow rate flexibility

    • Easy grip flow control ring graduated in 450 divisions

    • Linear speed vs. flow rate from 0 to 3600 RPM (360 ml/min)

    • Standard and low flow configurations



    图片关键词

     

    application-sprayingAdapter RH/Q

    Adds Versatility to your RH head by adapting it to any Q pump drive
    This is a complete adaptation system that permits use of an RH miniature pump head on any Q drive module. Once the RH pump head is fitted (3 screws) to the kit parts, it can be slipped into place on the drive module in seconds without tools. To remove it, simply loosen the two thumb nuts of the motor base and slip it off.

    Kit # RH/Q
    Masterflex Adapter

    Pump Heads 

    Pump Heads LF

    • For low flow (under 50 ml/min), and Zero Dead Volume Applications

    • Direct connection to 1/4-28 low flow fittings

    • RH-LF & Q-LF* pump heads feature integrally molded 1/4-28 female low dead volume ports. This allows for quick connections to 1/16" or 1/8" O.D. micro bore tubing and fittings such as FMI Q661

    • * Add suffix LF after Pump Head configuration